Add pinctrl driver for Allwinner A1X SoCs
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/6] Add pinctrl driver for Allwinner A1X SoCs
Quoted 12 lines · Maxime Ripard
Hi Alejandro,
Le 11/12/2012 22:58, Alejandro Mery a ?crit :
Quoted 9 lines · Maxime Ripard
Quoted 7 lines
Hi everyone,
This patch set adds a pinctrl driver for the IP found in the Allwinner A10
and A13, and the SoC-specific bits for the A13. It also adds the documentation
for the device tree bindings.
Quoted 8 lines
Quoted 4 lines
Hi. I just wanted to comment that there are 3 known sun5i SoCs, not only the A13. The A10s and the A12 are also sun5i. For A10s and A13 there are datasheets available with the pin info. So please don't assume the A13's pins are "sun5i" pins, they are merely aw1626 (aka A13) pins.
Ok, I will change the naming scheme to something like sun5i-a13. For the other SoC codenames like sun4i, are you aware of several actual SoCs using the same codename, or do we have only sun4i == A10?
the A10 is the only sun4i we know of, the A31 is the only sun6i we know of, and the A20 is the only sun7i we know of... they'll soon run out of numbers... :|
Also, to avoid confusions with their poorly chosen marketing name, you could use the internal chip name aw1623 for the A10 and aw1626 for the A13 instead. This value can be read from the BROM and it's commonly used in allwinner sources.
regards,
Alejandro Mery