IIO: AT91: add lowres, sleep and sample&hold time missing support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] IIO: AT91: add lowres, sleep and sample&hold time missing support
On 12/19/2012 07:32 PM, Jean-Christophe PLAGNIOL-VILLARD :
Quoted 14 lines
Hi,
The current adc driver is missing some key feature support
- select high/low resolution support
- sleep mode
- Sample and Hold TimeThis patch seris fix it
Without it the current driver is not usable in most of the caseJean-Christophe PLAGNIOL-VILLARD (2):
ARM: AT91: IIO: add sleep mode support
ARM: AT91: IIO: fix missing Sample and Hold time
Quoted 8 lines
Ludovic Desroches (1):
ARM: AT91: IIO: add low and high res support for adcDocumentation/devicetree/bindings/arm/atmel-adc.txt | 13 ++++++++++++ arch/arm/boot/dts/at91sam9260.dtsi | 3 +++ arch/arm/boot/dts/at91sam9g45.dtsi | 3 +++ arch/arm/boot/dts/at91sam9x5.dtsi | 3 +++ drivers/iio/adc/at91_adc.c | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
As this series is touching both a driver and the DT files, we will have to pay attention to the path that we will take for upstream.
Arm-soc is my preferred location...
Bye,
Quoted 5 lines
5 files changed, 107 insertions(+), 5 deletions(-)Best Regards,
J.
Signature · 1 line
Nicolas Ferre