watchdog/at91sam9_wdt: Convert to use the new framework
Get series with b4
b4 am [email protected]Versions newest first
- v4 Latest0 of 8 patches 1 replyIn review
Patches in v4 No applies recorded yet
None of the 8 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Nicolas Ferre |
|---|---|
| Series | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v4 0/8] watchdog/at91sam9_wdt: Convert to use the new framework
On 02/01/2013 08:06 AM, Wenyou Yang :
Quoted 8 lines
Hi, All
The purpose of the patch series is to convert
at91sam9_wdtto use the watchdog framework,Because the Watchdog Mode
Register(WDT_MR)which WDDIS bit to disable or disable the watchdog can be written only once after reset. so if you want to use the watchdog in the kernel, you must be sure the watchdog doesn't be disabled in the at91bootstrap.
Quoted 5 lines
It is tested on at91sam9m10g45ek both DT and non-DT support, at91sam9g25ek with DT support by building
Documentation/watchdog/src/watchdog-simple.c.It is based on v3.8-rc6 + Arnd Bergmann's
at91_wdt_dt_idscannot be__init
+ Fabio Porcedda's add timeout-sec property binding
On my side, I give my acknowledgement to the whole patch series:
I hope that once Fabio Porcedda's series is merged, this series can be applied on top of it seamlessly and quickly.
Wim,
Tell us if you need that we resend this series or rebase it on top of another git tree.
Thanks for your work and for your reviews.
Best regards,
Quoted 40 lines
ChangeLog
v4:
- remove the patch: Usemodule_platform_driver().
- add tested on at91sam9m10g45ek both DT and non-DT support.
- rebase on v3.8-rc6v3:
- The helper function 'watchdog_is_open' is moved toinclude/linux/watchdog.h
- Remove '__init' annotation from the function 'at91wdt_probe'
- Rebase on v3.8-rc2v2:
- Remove the patches to add devive tree support which Fabio Porcedda has applied.
- Replace__raw_readl,__raw_writelwithreadl_relaxed,writel_relaxed.
- Rebase on v3.7-rc8.Best Regards
Wenyou YangWenyou Yang (8):
watchdog: add the functionwatchdog_is_openwatchdog/at91sam9_wdt: Removeat91wdt_privateand addat91wdt_drvdata
struct
watchdog/at91sam9_wdt: Convert to use the watchdog framework watchdog/at91sam9_wdt: Adjust the options ofwatchdog_infowatchdog/at91sam9_wdt: Add nowayout helpers to Watchdog Timer Driver
Kernel API
watchdog/at91sam9_wdt: Remove the__initdataofat91wdt_wdd
ARM: dts: add the watchdog nodes for at91sam9x5 and at91sam9n12 SoC
ARM: dts: add the watchdog nodes for at91sam9g25ek andat91sam9m10g45ek boardsarch/arm/boot/dts/at91sam9m10g45ek.dts | 4 + arch/arm/boot/dts/at91sam9n12.dtsi | 6 + arch/arm/boot/dts/at91sam9x5.dtsi | 6 + arch/arm/boot/dts/at91sam9x5ek.dtsi | 4 + drivers/watchdog/at91sam9_wdt.c | 272 +++++++++++++------------------- include/linux/watchdog.h | 8 + 6 files changed, 140 insertions(+), 160 deletions(-)
Signature · 1 line
Nicolas Ferre