ARM: dts: Add DT bindings for OMAP SDMA
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest0 of 2 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Santosh Shilimkar |
|---|---|
| Series | Acked-Tested-by |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH V2 0/2] ARM: dts: Add DT bindings for OMAP SDMA
Quoted 54 lines · Jon Hunter
Adds device-tree bindings from SDMA on OMAP2+ devices. DMA client bindings are also added for devices that have SPI and MMC bindings populated. Client binding data is based upon existing HWMOD data for OMAP and has been checked against OMAP documentation.
Please note that the underlying (legacy) OMAP SDMA driver has not been ported over to DT and this still needs to be done. However, this allows DMA clients to look-up the DMA resource information via device-tree.
Testing includes ...
1. Boot tested on OMAP3430 Beagle board, OMAP4430 Panda board and OMAP4460 Panda board with and without device-tree present.
2. Testing of MMC1 with SD card on OMAP3430 Beagle board, OMAP4430 Panda board and OMAP4460 Panda board with and without device-tree present.Testing branch available here [1].
Series is based upon Tony Lindgren's omap-for-v3.9/multiplatform-v2 branch [2] on top of the following ...
- Vinod's topic/dmaengine_dt branch [3]
- Matt Porter's series "DMA Engine support for AM33XX" [4]
- Matt Porter's series "omap_hsmmcDT DMA Client support" [5]
- Sourav Poddar's series "add omap mcspi device tree data" [6]V2 changes:
- Updated to Tony's omap-for-v3.9/multiplatform-v2 branch to pull in DMA changes for v3.9
- Added comma toomap_dma_driverstructure as pointed out by Arnd.
- Updated OMAP SDMA DT binding compatible strings to indicate which devices are bit compatible with each other with respect to the SDMA controller. Grant had mentioned in the past that he wants the compatible string to be based upon a particular device and not something generic like "ti,omap-sdma".[1] https://github.com/jonhunter/linux/commits/dev-dt-dma
[2]git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.gitomap-for-v3.9/multiplatform-v2
[3] http://git.infradead.org/users/vkoul/slave-dma.git/shortlog/refs/heads/topic/dmaengine_dt
[4] http://permalink.gmane.org/gmane.linux.kernel.spi.devel/12508
[5] http://permalink.gmane.org/gmane.linux.ports.arm.omap/93165
[6] http://permalink.gmane.org/gmane.linux.kernel/1435002Jon Hunter (2):
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver.../devicetree/bindings/dma/omap-sdma.txt | 51 ++++++++++++++++++++ arch/arm/boot/dts/omap2.dtsi | 12 +++++ arch/arm/boot/dts/omap3.dtsi | 40 +++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 41 ++++++++++++++++ arch/arm/boot/dts/omap5.dtsi | 41 ++++++++++++++++ arch/arm/mach-omap2/dma.c | 4 ++ drivers/dma/omap-dma.c | 37 +++++++++++++- 7 files changed, 224 insertions(+), 2 deletions(-)
Quoted 2 lines
create mode 100644
Documentation/devicetree/bindings/dma/omap-sdma.txt