Skip to content

Tegra: MMC: Add DT support for MMC to T20 boards

Stephen Warren u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest0 of 4 patches 0 repliesNew
  2. v52 of 4 patches 0 repliesSuperseded
  3. v42 of 4 patches 0 repliesSuperseded

Patches in v7 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchStephen Warren
SeriesR-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v7 thread

Cover letter [U-Boot] [PATCH v7 0/4] Tegra: MMC: Add DT support for MMC to T20 boards
Quoted 10 lines · Tom Warren

This patchset adds device-tree support to the Tegra MMC driver. All device config is done via properties in the DT files instead of hard-coded config options/function arguments.

I've tested this on my Seaboard and everything works fine, including card detect. For the other T20 boards, I've used the Linux kernel DTS files for the sdhci nodes where there wasn't one already, or expanded the info that was already there. Everything builds fine, but I haven't tested anything but Seaboard.

Just to be explicit, this latest series/version,

Quoted 6 lines

v2: Changes as per Stephen's & Simon's review
v3: Changes as per Stephen/Lucas/Thierry/Simon's feedback
v4: Additional changes as per Stephen/Lucas/Thierry/Simon
v5: Additional changes as per Stephen/Lucas/Andy
v6: Additional changes requested by Stephen/Thierry
v7: Additional changes requested by Stephen

You've explicitly mentioned the changes in the individual patches, so I'd be inclined to just leave out the list here. If you keep it, it'd be useful to cut/paste all the changes from the individual patches, or summarize them explicitly; simply listing who requested the changes isn't that useful.