Skip to content

Tegra30: MMC: Add DT-based MMC driver for Tegra30/Cardhu

Stephen Warren u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for now)+0 -01 reply
1/5Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for now)+0 -00 replies
2/5Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30+0 -00 replies
3/5Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines+0 -01 reply
3/5Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines+0 -01 reply
3/5Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines+0 -01 reply
3/5Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines+0 -01 reply
3/5Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines+0 -00 replies

Reviews trailers per patch

None of the 8 patches has a Reviewed-by or Acked-by.

PatchStephen Warren
SeriesT-b
1/5
1/5
2/5
3/5
3/5
3/5
3/5
3/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/5] Tegra30: MMC: Add DT-based MMC driver for Tegra30/Cardhu
Quoted 6 lines · Tom Warren

This patchset adds SDMMC device-tree support to the Tegra30 dts files, and enables the Tegra MMC driver on Tegra30 Cardhu.

I've tested this on my Cardhu-A04 and everything works fine, including card detect. All Tegra boards also build w/o error, and Seaboard MMC functionality is unchanged.

The series,

(also on a Cardhu A04)

Now I can re-write our internal wiki to make use of commands like "bootz", "part" and "fsload" on all our boards :-) :-) :-)