Skip to content

ARM: dts: AM33XX: Cleanup and pinctrl binding support

Benoit Cousson linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 6 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH-V2 0/6] ARM: dts: AM33XX: Cleanup and pinctrl binding support

Hi Vaibhav,

The series looks good to me, but unfortunately does not apply cleanly on top of the latest for_3.10/dts branch.

Could you rebase it?

Thanks,
Benoit

Quoted 27 lines · Vaibhav Hiremath

This patch series fixes the numbering schema for I2C and GPIO module and adds the pin-control binding for I2C, UART, GPIO-LED across supported platforms (EVM, EVM-SK and Bone).

I have divided patches based on functionality and _not_ into EVM/Board perspective.

Changes from V1: (no code change from last version, except uart)
- Added Acked-by from Matt Porter and Peter Korsgaard on couple of patches.
- Added new patch (PATCH 5/6) in the series for UART indexing fix

Vaibhav Hiremath (6):
ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for I2C device
ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM
ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for UART0 device

 arch/arm/boot/dts/am335x-bone.dts  |   37 +++++++++++++++++++++-----
 arch/arm/boot/dts/am335x-evm.dts   |   50 ++++++++++++++++++++++++++++-------
 arch/arm/boot/dts/am335x-evmsk.dts |   45 ++++++++++++++++++++++++--------
 arch/arm/boot/dts/am33xx.dtsi      |   38 +++++++++++++-------------
 4 files changed, 123 insertions(+), 47 deletions(-)