Skip to content

gpio/omap: 2nd batch of updates for v3.10

Santosh Shilimkar linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchSantosh Shilimkar
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10
Quoted 19 lines · Jon Hunter

Main change is ensuring that the state of a gpio bank is restored when booting with device-tree. The rest of the patches are clean-ups and one optimisation.

The patch modifying the *.dtsi files should go via Benoit Cousson's for_3.10/dts branch [1] as it is dependent on changes in his branch but I have included here for completeness.

Testing includes:
- Boot testing on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP, OMAP4430 SDP and AM335x EVM.
- Verified that GPIO interrupts are working on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP and OMAP4430 SDP by making sure networking was working correctly as these boards use a GPIO with the ethernet chips. Also checked /proc/interrupts to ensure GPIO interrupt counts are incrementing as expected.

[1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git

Quoted 9 lines

Jon Hunter (4):
gpio/omap: free irq domain in probe() failure paths gpio/omap: optimise interrupt service routine gpio/omap: force restore if context loss is not detectable
ARM: dts: OMAP2+: Identify GPIO banks that are always powered

Tarun Kanti DebBarma (1):
gpio/omap: remove extra context restores in *_runtime_resume()

Thanks Jon for pulling the fixes. I suggest you to split the series so that 'gpio/omap:*' can be pulled by Grant and 'ARM: dts:*' by Benoit.

All the 'gpio/omap:*' patches in the series looks fine to me. FWIW,