RFC GPIO support for Microblaze
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest0 of 1 patch 0 repliesNew
Patches in v1 No applies recorded yet
The patch the cover letter announces is not in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze
Hi Simon,
here is also one small problem if you want to use patman just for one patch then cover letter contains 0/1 but patch itself doesn't contain 1/1.
I think will be good to just add 1/1 to patch too.
Generated by:./tools/patman/patman -c 1
Thanks,
Michal
Quoted 41 lines · Michal Simek
I want to also write gpio support for Zynq
and this driver should be also used for arm zynq.Currently we have support just for only gpio controller but not for various of them.
That's why I would like to get some input from you if possible to add dynamic gpio allocation which could be also helpful for OF support.Output from my gpio status on Microblaze is below.
Thanks,
MichalU-Boot> gpio status
gpio_info: reset/40000000 (0-0)GPIO_0:reset_pinis an INPUT value = 0
gpio_info: led/40040000 (1-5)GPIO_1: UNKNOWN is an INPUT value = 0GPIO_2: UNKNOWN is an OUTPUT value = 1GPIO_3: UNKNOWN is an INPUT value = 0GPIO_4: UNKNOWN is an INPUT value = 0GPIO_5: UNKNOWN is an OUTPUT value = 0Michal Simek (1):
gpio: Add support for microblaze xilinx GPIOarch/microblaze/include/asm/gpio.h | 50 +--- .../xilinx/microblaze-generic/microblaze-generic.c | 17 +- drivers/gpio/Makefile | 1 + drivers/gpio/xilinx_gpio.c | 323 +++++++++++++++++++++ include/configs/microblaze-generic.h | 3 +- 5 files changed, 353 insertions(+), 41 deletions(-) create mode 100644 drivers/gpio/xilinx_gpio.c--
1.8.2.1
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130424/4cafcdb1/attachment.pgp>