Skip to content

drivers: video: Optimisations for the ssd1307fb driver

Tomi Valkeinen linux-arm-kernel linux-fbdev lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] drivers: video: Optimisations for the ssd1307fb driver
Quoted 24 lines · Maxime Ripard

Hi everyone,

This is a patchset to improve significantly (by an order of magnitude) the refreshing time of the SSD1306 and SSD1307.

We do so by sending the pixels by batches, instead of 8 at a time, combined with some additionnal features found on these controllers that allows to send a whole screen content at once.

This obviously removes the tearing effect that was previously seen with these controllers.

This patchset depends on the "Add support for the Solomon SSD1306 OLED Controller" I sent previously.

Thanks,
Maxime

Maxime Ripard (4):
ARM: cfa10036: dt: Change i2c0 clock frequency
ssd1307fb: Rework the communication functions
ssd1307fb: Speed up the communication with the controller
ssd1307fb: Make use of horizontal addressing mode

Quoted 4 lines
 arch/arm/boot/dts/imx28-cfa10036.dts |    1 +
 drivers/video/ssd1307fb.c            |  123 ++++++++++++++++++++++++----------
 2 files changed, 89 insertions(+), 35 deletions(-)

I've taken the patches 2-4 into fbdev 3.11 branch. The first patch "ARM:
cfa10036: dt: Change i2c0 clock frequency" should preferably go through arch tree.

Tomi