Skip to content

ARM: tegra114: add CPU hotplug support

Stephen Warren linux-arm-kernel linux-tegra 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 of 6 patches 0 repliesNew

5 of 6 patches are in this archive. The cover letter announces 6.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6ARM: tegra: add an assembly marco to check Tegra SoC ID+0 -02 replies
2/6ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9+0 -01 reply
3/6ARM: tegra: make tegra_resume can work for Tegra114+0 -02 replies
5/6clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops+0 -00 replies
6/6ARM: tegra114: add CPU hotplug support+0 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] ARM: tegra114: add CPU hotplug support
Quoted 5 lines · Joseph Lo

Tegra 114 is different with other Tegra SoC chips. It using ARM Cortex-A15 as CPU core and a enhanced flow controller for CPU power control. So we need to skip some code that was for Contex-A9 and some other support code that was for other Tegra SoC chips. Then adding the proper power up and hot plug control for Tegra114.

This series mostly works OK, but I see one problem: I can't hotunplug CPU0, which the commit descriptions and code changes imply I should be able to do:

root at localhost:~# echo 0 > /sys/devices/system/cpu/cpu0/online -bash: echo: write error: Operation not permitted