Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Greg linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP

Le 22/05/2013 12:01, Sebastian Hesselbarth a ?crit :

Quoted 16 lines · Willy Tarreau
Quoted 8 lines · Thomas Petazzoni

(...)

Quoted 5 lines

As it was explained above, we unfortunately can't read the current base address of the internal register window, so we need a different mechanism to know if the bootloader has done the remapping at 0xF1000000 (new generation bootloader) or has left the internal registers at 0xD0000000 (old generation bootloader).

Quoted 6 lines

Just out of curiosity, what happens if you touch the register at the wrong address ? I mean, if you blindly write to the 0xD0xxxxxx address that you want the registers to be mapped at 0xF1xxxxxx. Will the chip hang, will it silently ignore the sequence ? Because maybe you don't need to detect using CP15 whether the remapping was done, you could simply perform it unconditionally.

Quoted 6 lines

Willy,

I tried the above on Dove which is possibly affected by the workaround as it is also ARMv7. In Dove you can access unmapped addresses without any problems, but as Thomas already stated Armada 370/XP just hang. Must be some default AHB slave in Dove, which Armada 370/XP is missing.

According to functionnal specs, when accessing a unmapped address, you will trigger a "coherency fabric" error named AccessErr (register 0x00020258).
I guess this will trigger an interrupt which will hang the CPU if the vector is not handled.

Greg