Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Sebastian Hesselbarth linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP
Quoted 9 lines · Russell King - ARM Linux

The question which was asked was:

	What happens if you access a register at 0xd0xxxxxx when the
	registers are remapped to 0xf1xxxxxx?

The answer which was given was:

It hangs on XP / 370, but doesn't on Dove.

...

Quoted 7 lines

What we need to know is: after the boot loader passes control to the kernel, and before _we_ start fiddling around with any clocks, is the region at 0xd0xxxxxx accessible without hanging the CPU?

That's the point at which we'd want to probe for the remapped registers, so that's the point where the test access must be made - and with the system clocks in whatever state was left by the reset+boot loader.

Russell,

I tried both Armada 370 and Dove on a very minimal console-only barebox. Poking the wrong addresses always hangs 370 while Dove happily returns zero.

Sebastian