Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Greg linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP

Le 24/05/2013 01:40, Russell King - ARM Linux a ?crit :

Quoted 14 lines · Thomas Petazzoni
Quoted 7 lines

Russell,

Quoted 3 lines · Russell King - ARM Linux

No, I'm not asking about the principle. I'm asking _in this particular problem case_ who provides the DT blob?

Quoted 6 lines
Quoted 2 lines

So the person to answer that question is Thomas or someone who is using the boards concerned.

The DTB is built from arch/arm/boot/dts/, together with the kernel image itself. As far as I'm aware of, there is for the moment no plan to "burn" the DTB on the board and therefore make the Device Tree really separated from the kernel.

Quoted 9 lines

Right, so we're still in the position where we aren't dealing with vendor provided DT blobs... this also means of course that the DT blob isn't going to get updated by the boot loader depending on where it decides to set the registers.

I suspect as far as the boot loaders on these boards go, the DT blob is "just another file" to be loaded into memory by the boot loader, and it is completely untouched by the boot loader.

Russell,

this is a little more complicated, the bootloader does touch the DT blob, for example it sets the MAC addresses of the network interfaces, I believe it also sets UART0 parameters. It does this silently if it founds entries it knows about in the DT blob.

I guess the good idea would have been to ask Marvell to also update an MBUS entry in the DT blob instead of doing the CP15 trick. This would not have solved the earlyprintk problem however.
I also guess this is not feasible anymore since it would imply to have 3 different bootloader possibilities and 2 already is a pain to deal with.

Does this raise any new idea to someone ?

Cheers,

PS: I also got Marvell's confirmation, there is no way to avoid CPU hang when accessing an unmapped memory address, this triggers an external abort exception which is not recoverable in kernel mode.