Skip to content

Add pinmux DT nodes to CPSW for AM335x

Benoit Cousson linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Add pinmux DT nodes to CPSW for AM335x
Quoted 19 lines · Mugunthan V N
Quoted 12 lines · Mugunthan V N

Add pinmux DT nodes to CPSW for the following AM335x boards
* AM335x Beaglebone
* AM335x EVM
* AM335x EVMsk
default state contains the pinmux required for active mode and sleep mode contains pinmux reset values for energy saving.

Mugunthan V N (3):
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM

Quoted 6 lines
  arch/arm/boot/dts/am335x-bone.dts  |   67 ++++++++++++++++++++++++++
  arch/arm/boot/dts/am335x-evm.dts   |   64 +++++++++++++++++++++++++
  arch/arm/boot/dts/am335x-evmsk.dts |   92
++++++++++++++++++++++++++++++++++++
  3 files changed, 223 insertions(+)
Quoted 4 lines

Benoit

Do you have any comments on this patch series,
if not can you queue it for v3.11

The series looks good to me. I've just applied it.

Thanks,
Benoit

Read the cover letter in its thread