Enable ethernet support for SOCFPGA
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Jack Mitchell |
|---|---|
| Series | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/4] Enable ethernet support for SOCFPGA
Quoted 57 lines · Dinh Nguyen
Hi Jack,
Quoted 40 lines · ZY - pavel
Hi!
Quoted 13 lines
Quoted 8 lines
These 4 patches are meant to enable ethernet and SD/MMC for the SOCFPGA platform.
patch (1/4): Adds select
ARM_TWDfor the platform
patch (2/4): Add platform specific initialization for the ethernet controller. patch (3/4): Commit25c83b5c2added "snps,phy-addr" for getting the PHY addr.
Set the ethernet clocks to beemac_0_clkandemac_1_clkso it be gated.
patch (4/4): Update defconfig to support SD/MMC, ethernet, EXT3 and NFS.What tree is this based against, or what patches are a pre-requisite to this series? I applied the patches to linux-arm/master but the compile failed.
Quoted 5 lines
arch/arm/mach-socfpga/socfpga.c: In function 'ksz9021rlrn_phy_fixup':arch/arm/mach-socfpga/socfpga.c:85:21: error:
'MICREL_KSZ9021_EXTREG_CTRL' undeclared (first use in this function)
phy_write(phydev,MICREL_KSZ9021_EXTREG_CTRL,^It seems it depends on:
Date: Mon, 15 Jul 2013 18:08:50 -0500
From: dinguyen at altera.com
To: dinh.linux at gmail.com, netdev at vger.kernel.org
Cc: Pavel Machek <[email protected]>, Nicolas Ferre <[email protected]>,
"David S. Miller" <[email protected]>, linux-arm-kernel at lists.infradead.org,
Shawn Guo <[email protected]>, Jean-Christophe Plagniol-Villard <[email protected]>, Andrew Victor <[email protected]>,
Dinh Nguyen <[email protected]>
Subject: [PATCH] phy: micrel: Add definitions for common Micrel PHY registers
X-Mailer: git-send-email 1.7.9.5From: Dinh Nguyen <[email protected]>
Quoted 7 lines
Add defines for common Micrel PHY setups so that other platforms can use them. Update imx61 and sama5 hardware to use the
micrel_phy.hPHY defines.Also add support for the KSZ9021RLRN PHY.
Signed-off-by Dinh Nguyen <[email protected]>Yes, the above patch is necessary. I was hoping that patch can go into either Shawn's or Nicolas' tree. I have received ACKs from both. There is also the SD/MMC bindings patch that has not been applied to the arm-soc tree yet. I have started collecting the patches at github in the meantime:
Quoted 3 lines
git at github.com:dinh-linux/linux-socfpga.git for-next
Dinh
Dinh,
Perfect, that boots from the mmc! For what it's worth, for the whole series + pre-requisite patches on an Arrow SoCkit devkit:
Signature · 5 lines
Jack Mitchell (jack at embed.me.uk) Embedded Systems Engineer http://www.embed.me.uk --