ARM: tegra: support LP1 suspend mode
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 8 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 8 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/8] ARM: tegra: support LP1 suspend mode
27.07.2013 23:03, Marc Dietrich ?????:
Quoted 49 lines · On Saturday 27 July 2013 22:26:06 Dmitry Osipenko wrote:
Quoted 41 lines
27.07.2013 22:09, Marc Dietrich ?????:
Quoted 33 lines · On Saturday 27 July 2013 20:20:38 Dmitry Osipenko wrote:
Quoted 31 lines
27.07.2013 20:12, Marc Dietrich ?????:
Quoted 30 lines · On Friday 26 July 2013 17:15:02 Joseph Lo wrote:
Quoted 3 lines
This series adds the support of LP1 suspend mode for Tegra.
Verified on Seaboard, Cardhu and Dalmore.
tested on AC100 and worked fine, except
[ 68.448007] PM: Syncing filesystems ... done. [ 71.370086] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 71.370088] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 71.371253] Suspending console(s) (use no_console_suspend to debug) [ 71.638481] PM: suspend of devices complete after 266.604 msecs [ 71.638905] PM: late suspend of devices complete after 0.417 msecs [ 71.639477] PM: noirq suspend of devices complete after 0.568 msecs [ 71.639480] Disabling non-boot CPUs ... [ 71.640242] CPU1: shutdown [ 71.641216] Entering suspend state LP1 [ 71.641267] Enabling non-boot CPUs ... [ 71.643125] CPU1: Booted secondary processor [ 71.643449] CPU1 is up [ 71.643786] PM: noirq resume of devices complete after 0.331 msecs [ 71.644300] PM: early resume of devices complete after 0.364 msecs [ 71.648038] ------------[ cut here ]------------ [ 71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529 irq_set_irq_wake+0xb8/0xf0() [ 71.648064] Unbalanced IRQ 384 wake disable [ 71.648068] Modules linked in: [ 71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2-next-20130726-00008-gef01509-dirty #6
Quoted 3 lines
Stephen Warren said on IRC that this is known and on the internal bug tracker already. I just posted it so others are not surprised. Well, I should have added that it's a know problem. Sorry for that.
It might be a known problem only for those who faced with it. Since it's on their internal irc, it wasn't a known issue.
Quoted 6 lines
It also would be interesting to know if suspend with thumb2 works correctly. On 3.8 I've ported lp0 suspend and it works fine with arm compiled kernel, thumb2 also works but only for about 5-10 hours (resuming on each 5-30 minutes, default android behavior) and after I'm getting pmd corruption. I have no idea from where that corruption comes from without ability for hw debugging.
Quoted 6 lines
I don't think anyone can comment on this because lp0 support for mainline is not published yet. On the other hand, if you have patches for which you want some review, feel free to post them here.
Marc
I'm not expecting comment on it, just for notice :) I'll try this patches in some near future.