Skip to content

DRA7xx core support

Santosh Shilimkar linux-arm-kernel linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 8 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 8 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/8] DRA7xx core support
Quoted 42 lines · Rajendra Nayak

Changes in v2:
-1- Fixed minor changelog details
-2- Dropped the SRAM support patch since we need to move to drivers/misc/sram.c -3- Added DTS update patches to this series which were earlier posted as part of the data series (Since they don't have much objections as against the other in-kernel data files)
-4- Updated the EVM dts file with pin config details for uart/mcspi and i2c

DRA7xx based SoCs' are high-performance, infotainment application devices, based on enhanced OMAP architecture integrated on a 28nm technology.

The DRA7xx family is composed of DRA75x and DRA74x devices. The current device for which the patches add support is the DRA752 SoC.

Most of the core IPs are similar to those found on the OMAP5 devices, including the dual cortex-A15 based MPU subsystem, which has helped quite some reuse from existing OMAP5 support.

This series contains only core support patches and none of the PRCM and hwmod data needed for the device to boot.

The bootloader support for the platform is already available in mainline u-boot.

The patches posted in this series are available at:
git://github.com/rrnayak/linux.git for-3.12/dra-core-v2

The patches (including the ones for in-kernel data) which boot on dra7xx evm are available at:
t://github.com/rrnayak/linux.git out-of-tree/dra-integrated-v2

R Sricharan (7):
ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
ARM: DRA7: Reuse io tables and add a new .init_early
ARM: DRA7: Resue the clocksource, clockevent support
ARM: DRA7: board-generic: Add basic DT support
ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board

Quoted 3 lines

Rajendra Nayak (1):
ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5

I quickly scanned the series and largely it looks good to me. The suggestion on dts and soc_id seems to be the valid ones and good to address them. Feel free to add my ack when you respin the series with those couple of issues addressed.

Regards,
Santosh

Read the cover letter in its thread