r8169: add support for RTL8127ATF (10G Fiber SFP)
Status from this message: This series was applied to netdev/net-next.git (main)
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest2 patches 5 repliesApplied 2/2
- v12 patches 14 repliesSuperseded
Changes in v2 from the cover letter
- move realtek_phy.h to new include/net/phy/
Patches in v2 All 2 applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | net: phy: realtek: add dummy PHY driver for RTL8127ATFMAINTAINERS drivers/ include/ | +62 | 0 replies | Applied |
| 2/2 | r8169: add support for RTL8127ATF (Fiber SFP)drivers/ | +85 | 1 reply | Applied |
Reviews trailers per patch
None of the 2 patches has a Reviewed-by or Acked-by.
| Patch | Fabio Baltieri |
|---|---|
| 1/2 | |
| 2/2 | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next v2 0/2] r8169: add support for RTL8127ATF (10G Fiber SFP)
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and DAC). The list of supported modes was provided by Realtek. According to the r8127 vendor driver also 1G modules are supported, but this needs some more complexity in the driver, and only 10G mode has been tested so far. Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware. Therefore mainline SFP support can't be used here.
The PHY driver is used by the RTL8127ATF support in r8169. RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy PHY ID.
v2:
- move realtek_phy.h to new include/net/phy/
Heiner Kallweit (2):
net: phy: realtek: add dummy PHY driver for RTL8127ATF
r8169: add support for RTL8127ATF (Fiber SFP)
MAINTAINERS | 1 + drivers/net/ethernet/realtek/r8169_main.c | 89 ++++++++++++++++++++++- drivers/net/phy/realtek/realtek_main.c | 54 ++++++++++++++ include/net/phy/realtek_phy.h | 7 ++ 4 files changed, 147 insertions(+), 4 deletions(-) create mode 100644 include/net/phy/realtek_phy.h
Signature · 1 line
2.52.0