Skip to content

spi: Add zynq spi controller

Jagan Teki u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 3 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/3] spi: Add zynq spi controller
Quoted 14 lines · Jagannadha Sutradharudu Teki

This is a v2 for previous series with same cover head.

This small series patchset will add suuport for zynq spi controller, tested on sst flash.

--
Thanks,
Jagan.

Jagannadha Sutradharudu Teki (3):
spi: Add zynq spi controller driver
sf: sst: Add support for SST25WF080
zynq: Enable CONFIG_ZYNQ_SPI

Quoted 8 lines
  arch/arm/include/asm/arch-zynq/hardware.h |   2 +
  drivers/mtd/spi/sst.c                     |   6 +
  drivers/spi/Makefile                      |   1 +
  drivers/spi/zynq_spi.c                    | 280 ++++++++++++++++++++++++++++++
  include/configs/zynq.h                    |   9 +
  5 files changed, 298 insertions(+)

create mode 100644 drivers/spi/zynq_spi.c

Applied to u-boot-spi/master

--
Thanks,
Jagan.

Read the cover letter in its thread