Skip to content

DRA7xx PRCM, hwmod and DT data

Rajendra Nayak linux-arm-kernel linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 12 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 12 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/12] DRA7xx PRCM, hwmod and DT data
Quoted 14 lines · Paul Walmsley
Quoted 11 lines · Rajendra Nayak

This series adds the data files for DRA7xx devices for PRCM, hwmod and DT. This is dependent on the core support [1] patches for DRA7xx and leaves out the clock data since its on its way to DT [2]

The regbit headers for prm and cm are cleaned up post the autogeneration as 95% was seen to be currently unused (prm-regbits-7xx.h was 100% unused and hence removed)

These patches along with the core support patches are available at:
git://github.com/rrnayak/linux.git for-3.12/dra-core-data

Quoted 6 lines

Have glanced through these patches. The form looks okay to me. But again it's impossible to me to spot-check or verify almost anything in the data here, until some documentation is available. Nor can I verify that the series works here, since I don't have a DRA7xx board. It would be best for TI and for upstream Linux if us maintainers outside TI could at least test these patches, otherwise we are flying blind.

I agree Paul. There isn't a public TRM available yet but I will see if an NDA TRM can be made available to all maintainers.
As for the boards, we are really running short of these for now due to lower fab yield etc, but once the situation improves I will push for boards to be shipped.

Quoted 8 lines

One minor comment is that I think the credit information in the comments of the data files needs to be qualified. Instead of simply:

+ * Paul Walmsley (paul at pwsan.com)
+ * Rajendra Nayak (rnayak at ti.com)
+ * Benoit Cousson (b-cousson at ti.com)

Quoted 8 lines

it would be better if it read something like:

* Generated by code originally written by:
* Paul Walmsley (paul at pwsan.com)
* Rajendra Nayak (rnayak at ti.com)
* Benoit Cousson (b-cousson at ti.com)

or something similar. Same for the oth

a files.

Quoted 3 lines

Are you fine with this change, or do you have some similar wording that
you think is better? No need to repost, I'll update the patches here.

Thanks, looks fine to me.
Btw, Patch 11/12 and 12/12 of this series are already pulled in by Tony and Benoit resp.

Quoted 4 lines

- Paul