ARM: shmobile: kzm9d-reference: migrate to common clock framework with DT
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 3 repliesIn review
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Greg Kroah-Hartman | Daniel Lezcano | Laurent Pinchart | Magnus Damm |
|---|---|---|---|---|
| Series | A-b | A-b | A-b A-b | A-b A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.
Cover letter [PATCH 0/6] ARM: shmobile: kzm9d-reference: migrate to common clock framework with DT
This patch series makes kzm9d-reference to move to new clk implementation
based on the common clock framework and device tree.
First three are for preparation.
[PATCH 1/6] clocksource: em_sti: convert to clk_prepare/unprepare [PATCH 2/6] serial8250-em: convert to clk_prepare/unprepare [PATCH 3/6] sh: clkfwk: Select sh-/common- clkfwk alternatively
Next one is a proposal document of DT bindings. [PATCH 4/6] ARM: shmobile: emev2: Define SMU clock DT bindings
This is the implementation, and dts which carries clock tree description. [PATCH 5/6] clk: emev2: Add support for emev2 SMU clocks with DT
Last one is small modification needed for migration. [PATCH 6/6] ARM: shmobile: kzm9d-reference: Use common clock
These patches do not remove sh-clkfwk version, even on emev2. kzm9d(without -reference) target still uses sh-clkfwk.
I believe this method encourages step-by-step migration on other sh-mobile
targets, too.
Patches should be applied and compiled both on
v3.12-rc2 and
kernel/git/horms/renesas.git tag:renesas-devel-20130922
Confirmed on kernel/git/horms/renesas.git tag:renesas-devel-20130922 for boot up to command prompt.
- kzm9d board / multiplatform + kzm9d-reference configuration
- kzm9d board / kzm9d-reference configuration
- kzm9d board / kzm9d (with sh-clkfwk) configuration for regression.
- ape6evm (with sh-clkfwk) for regression.
for compile only
- sh7757lcr (in arch/sh with sh-clkfwk) for regression.
Shinya Kuribayashi (2):
clocksource: em_sti: convert to clk_prepare/unprepare
serial8250-em: convert to clk_prepare/unprepare
Takashi YOSHII (4):
sh: clkfwk: Select sh-/common- clkfwk alternatively
ARM: shmobile: emev2: Define SMU clock DT bindings
clk: emev2: Add support for emev2 SMU clocks with DT
ARM: shmobile: kzm9d-reference: Use common clock framework
.../devicetree/bindings/clock/emev2-clock.txt | 99 ++++++++++++++++++++ arch/arm/Kconfig | 2 +- arch/arm/boot/dts/emev2.dtsi | 84 +++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/board-kzm9d-reference.c | 5 +- arch/sh/Kconfig | 1 + drivers/clk/Makefile | 2 + drivers/clk/shmobile/Makefile | 5 + drivers/clk/shmobile/clk-emev2.c | 104 +++++++++++++++++++++ drivers/clocksource/em_sti.c | 4 +- drivers/sh/clk/Makefile | 3 +- drivers/tty/serial/8250/8250_em.c | 6 +- 12 files changed, 305 insertions(+), 11 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/emev2-clock.txt create mode 100644 drivers/clk/shmobile/Makefile create mode 100644 drivers/clk/shmobile/clk-emev2.c
Signature · 1 line
1.8.1.5