ARM: tegra: add CPU hot-plug and idle support for Tegra124
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest0 of 4 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH V2 0/4]
Quoted 11 lines · Joseph Lo
This series adds the LP1 support for Tegra124. (suspend to LP2 also supported in this series)
Note:
This patch series depends on the patch series below.
* [PATCH 0/5] Tegra124 clock support
* [PATCH V2 0/6] ARM: tegra: basic support for Tegra124 SoC
* [PATCH] ARM: tegra: add clock properties for devices of Tegra124
* [PATCH] ARM: tegra: enable Tegra RTC as default for Tegra124
* [PATCH 0/4] ARM: tegra: add CPU hot-plug and idle support for Tegra124
Quoted 1 line
Verified on Cardhu, Dalmore and Venice2 and with
THUMB2_KERNELas well.
I have applied patches 2-3 to Tegra's for-3.13/soc branch, and patch 4 to Tegra's for-3.13/dt branch.
I have not applied patch 1, since that's a clock driver change. Please work with Mike and/or Peter to send that patch through the clock tree. In general, if there aren't any compile-time or run-time dependencies (for existing features, not new ones) between patches, patches for different subsystems should be sent separately, rather than as a combined series.
Note that "[PATCH] ARM: tegra: add clock properties for devices of Tegra124" is not yet applied; I'm waiting for Peter's Tegra124 clock series to be finalized before applying that. There's no compile-time dependency here, and the patch only enables new features without breaking existing ones, so there's no bisection issue here.