Skip to content

I2C: Zynq

Heiko Schocher u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v8 Latest posting 2/20 of 2 patches 0 repliesNew
  2. v8 posting 1/21 of 2 patches 0 repliesSuperseded

Patches in v8 posting 2/2 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v8 yet.

Read the v8 thread

Cover letter [U-Boot] [PATCH v8 0/2] I2C: Zynq

Hello Jagan,

Am 17.10.2013 12:43, schrieb Jagan Teki:

Quoted 28 lines

Hi Michael,

Quoted 25 lines · Heiko Schocher

Hello Michael,

Am 15.10.2013 22:23, schrieb Michael Burr:

Quoted 19 lines

This series of two patches contains improvements for the I2C driver on the Xilinx Zynq architecture. In general, the goals are:

Quoted 4 lines

Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS. Full support for bus multiplexers.
Support for all register-address sizes (0, 1, 2).

The changes to file 'zynq_i2c.c' in this patch series are meant to be applied in order: in other words, first apply the changes from the PATCH 1/2 version; then apply the changes in the PATCH 2/2 version.

v3: fixed mistake parsing PATCH 1/2
v4: _really_ fixed this time!
v5: yet another try
v6: one more time
v7: again
v8: last time (see comments in PATCH 1/2)

Quoted 5 lines
Quoted 2 lines

? I am lost in space now ... you are sure this is the finally version? Really tested? I have no chance to test your changes ...

Just confused this style of sending patches. Anyway I have tested on these on zynq boards, works fine.

Thanks for testing!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany