Skip to content

udoo: Move and optimize platform register setting.

Stefano Babic u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 0 repliesNew
  2. v12 of 4 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4udoo: Add ethernet support (FEC + Micrel KSZ9031).+0 -04 replies
1/4udoo: Add ethernet support (FEC + Micrel KSZ9031).+0 -01 reply
2/4nitrogen6x: Move setup_sata to common part+0 -00 replies
4/4udoo: Fix watchdog during kernel boot.+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting.
Quoted 6 lines · Giuseppe Pagano

Previous uDoo configuration adopts register settings for DDR3, clock, muxing, etc. taken from Nitrogen6x. uDoo schematics is rather different from that board, and it needs customized setting for most of the registers.
All this changes can be considered atomical since it is part of initial support of the board.

Quoted 8 lines

Patch changes uDoo configuration files path to a specific one, and adopt optimized value for every configured register.

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================