Skip to content

: add remaining support for IGEP boards

Javier Martinez Canillas linux-arm-kernel linux-omap 2 versions – New

Get series with b4
b4 am 1384909575-19108-1-git-send-email-javier.martinez@collabora.co.uk

Versions newest first · linked by author and title

  1. v2 Latest11 patches 0 repliesNew
  2. v10 of 11 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/11ARM: dts: omap3-igep: Fix bus-width for mmc1.arch/arm/boot/dts/omap3-igep.dtsi+1 -50 replies
2/11ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.arch/arm/boot/dts/omap3-igep.dtsi+44 -10 replies
3/11ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.arch/arm/boot/dts/omap3-igep.dtsi arch/arm/boot/dts/omap3-igep0020.dts arch/arm/boot/dts/omap3-igep0030.dts+6 -60 replies
4/11ARM: dts: omap3-igep0020: Add pinmux setup for i2c devicesarch/arm/boot/dts/omap3-igep.dtsi+30 -00 replies
5/11ARM: dts: omap3-igep0020: Add pinmuxing for DVI outputarch/arm/boot/dts/omap3-igep0020.dts+41 -00 replies
6/11ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable displayarch/arm/boot/dts/am335x-base0033.dts+47 -00 replies
7/11ARM: dts: AM33XX BASE0033: add pinmux and user led support.arch/arm/boot/dts/am335x-base0033.dts+26 -00 replies
8/11ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.arch/arm/boot/dts/am335x-base0033.dts+7 -00 replies
9/11ARM: dts: AM33XX IGEP0033: add USB support.arch/arm/boot/dts/am335x-igep0033.dtsi+29 -00 replies
10/11ARM: OMAP: dss-common: change IGEP's DVI DDC i2c busarch/arm/mach-omap2/dss-common.c+1 -10 replies
11/11ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsiarch/arm/boot/dts/omap3-igep0020.dts+5 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 00/11]: add remaining support for IGEP boards

In order to make mach-omap2 Device Tree only, the board file for IGEP boards was removed even when support for wifi and display was still not supported by its DTS.

This is a second version of a patch-set that adds support for these remaining peripherals and also adds support for USB, HDMI and user LED for the am33xx SoC based IGEP Aquila board.

The patch-set is composed of the following patches:

Enric Balletbo i Serra (7):
ARM: dts: omap3-igep: Fix bus-width for mmc1.
ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.
ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
ARM: dts: AM33XX BASE0033: add pinmux and user led support.
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.
ARM: dts: AM33XX IGEP0033: add USB support.

Javier Martinez Canillas (4):
ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi

Changes since v1:

Don't add a workaround in drivers/video/omap2/dss/dpi.c to use the VPLL2 regulator from twl4030 if VDDS_DSI regulator is not linked to the DPI device since the used regulator is a per board configuration.

Instead add a regulator-name = "vdds_dsi" property to the regulator in the IGEPv2 DTS file as suggested by Tony Lindgren.

Tony,

Most of these patches are just DTS changes so they have to be picked by Benoit besides the following patch that has to go through your tree

[PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus

Since we have removed the board file for IGEP boards I think these can be considered as regression fixes for 3.13 although I don't mind if you prefer to wait for 3.14.

Thanks a lot and best regards,
Javier