Skip to content

RFC DT support for ST micro accelerometers and gyroscopes

Denis CIOCCA linux-arm-kernel linux-devicetree linux-iio 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes

Hi Maxime, everyone,

only one point: it's possible to use the same names with DT? (using _ instead of -)
Why only for i2c?

Thanks,
Denis

Quoted 32 lines

Hi everyone,

This is an attempt at adding the DT probing to the st_sensors accelerometers and gyroscopes.

It's somewhat hackish, because the core actively checks for the value of the device at probe time, and DT probing generates a quite different name.

I first tried to turn the function st_sensors_check_device_support the other way around, with the "leaf" providing the sensor structure, and the function checking that it's consistent with the WAI stored in the sensor. However, it turned to be a quite intrusive change, so I'm sending the easiest one, to try to get some feedback :)

Thanks!
Maxime

Maxime Ripard (3):
iio: accel: Add device tree probing for STMicro accelerometers
iio: accel: Add device tree probing for STMicro gyroscopes
ARM: cfa10057: Add the accelerometer and gyroscope to the device tree

  .../devicetree/bindings/iio/accel/st_accel_i2c.txt | 22 +++++++++++++++
  .../devicetree/bindings/iio/gyro/st_gyro_i2c.txt   | 20 +++++++++++++
  arch/arm/boot/dts/imx28-cfa10057.dts               | 13 +++++++++
  drivers/iio/accel/st_accel_i2c.c                   | 33 ++++++++++++++++++++++
  drivers/iio/gyro/st_gyro_i2c.c                     | 31 ++++++++++++++++++++
  5 files changed, 119 insertions(+)

create mode 100644 Documentation/devicetree/bindings/iio/accel/st_accel_i2c.txt create mode 100644 Documentation/devicetree/bindings/iio/gyro/st_gyro_i2c.txt