: add remaining support for IGEP boards
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest0 of 11 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 11 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 00/11]: add remaining support for IGEP boards
Quoted 51 lines · Javier Martinez Canillas
Quoted 41 lines · Javier Martinez Canillas
In order to make mach-omap2 Device Tree only, the board file for IGEP boards was removed even when support for wifi and display was still not supported by its DTS.
This is a second version of a patch-set that adds support for these remaining peripherals and also adds support for USB, HDMI and user LED for the am33xx SoC based IGEP Aquila board.
The patch-set is composed of the following patches:
Enric Balletbo i Serra (7):
ARM: dts: omap3-igep: Fix bus-width for mmc1.
ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.
ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
ARM: dts: AM33XX BASE0033: add pinmux and user led support.
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.
ARM: dts: AM33XX IGEP0033: add USB support.Javier Martinez Canillas (4):
ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator asvdds_dsiChanges since v1:
Don't add a workaround in
drivers/video/omap2/dss/dpi.cto use the VPLL2 regulator from twl4030 ifVDDS_DSIregulator is not linked to the DPI device since the used regulator is a per board configuration.Instead add a regulator-name = "
vdds_dsi" property to the regulator in the IGEPv2 DTS file as suggested by Tony Lindgren.Tony,
Most of these patches are just DTS changes so they have to be picked by Benoit besides the following patch that has to go through your tree
[PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
Quoted 7 lines
Since we have removed the board file for IGEP boards I think these can be considered as regression fixes for 3.13 although I don't mind if you prefer to wait for 3.14.
Thanks a lot and best regards,
Javier
--
Quoted 8 lines
Hi Benoit and Tony,
Now that 3.13-rc1 is out, do you think that it would be possible to include this series as a fix for the -rc cycle?
Otherwise we will have missing functionality for IGEP boards on 3.13 due the board file removal. The changes are mostly DT and won't affect other boards.
The DSS related parts look fine to me.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 901 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131126/2396ccc3/attachment.sig>