OMAP USB host fixes for Beagle & Panda
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/3] OMAP USB host fixes for Beagle & Panda
Hi,
Quoted 27 lines · Tomi Valkeinen
Quoted 16 lines · Roger Quadros
Hi,
This series
- Fixes OMAP4 Panda USB device detection issues
- Gets rid of ULPI reset errors on Beagle & Panda---
cheers,
-rogerRoger Quadros (3):
usb: ehci-omap: Reset the USB Host OMAP module
omap3_beagle: Don't useulpi_reset
omap4_panda: Don't useulpi_resetQuoted 4 lines
drivers/usb/host/ehci-omap.c | 57 +++++++++++++++++++++++++++++++----------- include/configs/omap3_beagle.h | 3 --- include/configs/omap4_panda.h | 3 --- 3 files changed, 42 insertions(+), 21 deletions(-)Tested on OMAP4 Panda and OMAP3 Beagle xM.
Usually seems to work, but on Panda I still sometimes see that the eth is not found:
Quoted 6 lines
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found
No ethernet found.
Thanks for the tests. I'll need to investigate more, but the patches are good enough to go as they are.
cheers,
-roger