Skip to content

Introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY, and use it on cm_t35

Nikita Kiryanov u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] Introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY, and use it on cm_t35

This series is superceded by the following patch:
http://patchwork.ozlabs.org/patch/300617/

Quoted 20 lines · Nikita Kiryanov

Commit "mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform" (d016dc42cedbf6102e100fa9ecb58462edfb14f8) changed the way software ECC is configured. The change is not incorrect, but it does cause compatibility issues for boards that depended on the old behavior. Therefore, instead of reverting the change, a quirks option is introduced to allow boards to get the old behavior back. This config option is then used in cm_t35.

Cc: Igor Grinberg <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Scott Wood <[email protected]>
Cc: Pekon Gupta <[email protected]>
Nikita Kiryanov (2):
arm: omap: nand: introduce CONFIG_NAND_OMAP_SW_ECC_LEGACY
arm: omap: cm_t35: fix nand sw ecc incompatibility with X-Loader

  doc/README.nand              | 7 +++++++
  drivers/mtd/nand/omap_gpmc.c | 4 ++++
  include/configs/cm_t35.h     | 1 +
  3 files changed, 12 insertions(+)
Signature · 2 lines
Regards,
Nikita.