Skip to content

thermal: rcar: Add missing clock handling

Valentine linux-arm-kernel linux-pm linux-sh 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] thermal: rcar: Add missing clock handling
Quoted 1 line · Geert Uytterhoeven

Hi all,

Hi Geert,

Quoted 4 lines

This patch series fixes a problem when the thermal-rcar device is instantiated from the device tree on the r8a7791-based Koelsch development board. The driver fails during initialization with:

I think explicitly acquiring the clocks should not be needed. Could you please try the patches from the following series instead?

http://marc.info/?l=linux-sh&m=138823255807611&w=2

Thanks,
Val.

Quoted 32 lines

rcar_thermal e61f0000.thermal: thermal sensor was broken

This does not happen when using legacy platform devices.

This series was tested using Koelsch reference (DT) and non-reference (legacy) kernel configurations. It was not tested on r8a7790/Lager (which is very similar).

[1/4] ARM: shmobile: r8a7791: Add thermal clock in device tree [2/4] ARM: shmobile: r8a7790: Add thermal clock in device tree [3/4] thermal: rcar: Add missing clock handling [4/4] thermal: rcar: Spelling s/delaye/delay/g

Thanks for your comments!

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Read the cover letter in its thread