Change some boards to use zImage in default environment
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 11 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 11 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
Hi Otavio,
Quoted 44 lines · Otavio Salvador
Hello,
This patchset does as stated in the subject. It has been build tested as can be seen below:
Configuring for vf610twr - Board: vf610twr, Options: IMX_CONFIG=board/freescale/vf610twr/imximage.cfg
text data bss dec hex filename
203367 8666 212712 424745 67b29 ./u-boot
Configuring forudoo_quad- Board: udoo, Options: IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024
text data bss dec hex filename
217468 7882 218844 444194 6c722 ./u-boot
Configuring for mx6slevk - Board: mx6slevk, Options: IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
text data bss dec hex filename
198964 7702 218568 425234 67d12 ./u-boot
Configuring for mx6qsabresd - Board: mx6sabresd, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
text data bss dec hex filename
252239 58938 219028 530205 8171d ./u-boot
Configuring for mx6qsabreauto - Board: mx6qsabreauto, Options: IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q
text data bss dec hex filename
261433 9510 297784 568727 8ad97 ./u-boot
Configuring for mx6qarm2 - Board: mx6qarm2, Options: IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
text data bss dec hex filename
192000 7414 218552 417966 660ae ./u-boot
Configuring for mx53loco - Board: mx53loco, Options: IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
text data bss dec hex filename
281391 19282 307156 607829 94655 ./u-boot
Configuring for mx51evk - Board: mx51evk, Options: IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
text data bss dec hex filename
268149 19126 301104 588379 8fa5b ./u-boot
Configuring for mx28evk - Board: mx28evk, Options:ENV_IS_IN_MMC
text data bss dec hex filename
431361 33206 326384 790951 c11a7 ./u-boot
6315 760 0 7075 1ba3 ./spl/u-boot-spl
Configuring for mx23evk board...
text data bss dec hex filename
209197 18636 304284 532117 81e95 ./u-boot
6307 164 0 6471 1947 ./spl/u-boot-spl
Configuring forhummingboard_solo- Board: hummingboard, Options: IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512
text data bss dec hex filename
209614 7878 236376 453868 6ecec ./u-boot
Configuring for cgtqmx6qeval - Board: cgtqmx6eval, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
text data bss dec hex filename
186342 7506 218632 412480 64b40 ./u-boot
Quoted 7 lines
--------------------- SUMMARY ---------------------------- Boards compiled: 12
----------------------------------------------------------Regards,
Whole patchset applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================