Skip to content

ARM: mvebu: add a clock for mdio nodes on Armada 370/38x/XP

Gregory CLEMENT linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchGregory CLEMENT
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] ARM: mvebu: add a clock for mdio nodes on Armada 370/38x/XP
Quoted 7 lines · Thomas Petazzoni

Jason, Andrew, Gregory, Sebastian,

Here is a set of two patches that add a clock specification to the mdio node on Armada 370/XP and Armada 38x. This allows the mvmdio driver to work properly when loaded as a module, before mvneta is loaded.

Quoted 9 lines

I've separated the Armada 370/XP and Armada 38x fixes in two patches, because the Armada 370/XP fix should be pushed to stable, while the Armada 38x does not need to be pushed to stable since Armada 38x support only appears in 3.15.

Thanks,

Thomas

For both patches:

Acked-by Gregory CLEMENT <[email protected]>

Thanks,

Gregory

Quoted 9 lines

Thomas Petazzoni (2):
ARM: mvebu: ensure the mdio node has a clock reference on Armada

    370/XP

ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x

 arch/arm/boot/dts/armada-370-xp.dtsi | 1 +
 arch/arm/boot/dts/armada-38x.dtsi    | 1 +
 2 files changed, 2 insertions(+)
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Read the cover letter in its thread