Skip to content

Add support to Odroid U3/X2

Minkyu Kang u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v8 Latest0 of 12 patches 0 repliesNew

Patches in v8 No applies recorded yet

None of the 12 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v8 yet.

Read the v8 thread

Cover letter [U-Boot] [PATCH v8 00/12] Add support to Odroid U3/X2
Quoted 51 lines · Przemyslaw Marczak

This patch set introduces changes to common Samsung code as a preparation of new board support:
- boot device check - code cleanup
- automatic init order of mmc drivers
- automatic setting of dfu entities which depends on boot device
- pre reset function call for board own implementation
- setting board info environment for multi board support

New board config:
- odroid_config - Odroid U3/X2 support

V8 changes:
- patchset adjust to Kconfig

Przemyslaw Marczak (12):
samsung: misc: fix soc revision setting in the set_board_info()
exynos: pinmux: fix the gpio names for exynos4x12 mmc arch:exynos: boot mode: add get_boot_mode(), code cleanup board:samsung: check the boot device and init the right mmc driver.
samsung: misc: add function for setting $dfu_alt_info samsung:board: misc_init_r: call set_dfu_alt_info() arm:reset: call the reset_misc() before the cpu reset
samsung: board: enable support of multiple board types
samsung: misc: use board specific functions to set env board info
odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
odroid: add odroid U3/X2 device tree description
odroid: kconfig: add odroid_defconfig

 arch/arm/cpu/armv7/exynos/Kconfig        |   4 +
 arch/arm/cpu/armv7/exynos/pinmux.c       |   4 +-
 arch/arm/cpu/armv7/exynos/power.c        |   7 +
 arch/arm/cpu/armv7/exynos/spl_boot.c     |   7 +-
 arch/arm/dts/Makefile                    |   3 +-
 arch/arm/dts/exynos4412-odroid.dts       |  70 +++++
 arch/arm/include/asm/arch-exynos/power.h |  21 ++
 arch/arm/include/asm/arch-exynos/spl.h   |  17 +-
 arch/arm/lib/reset.c                     |   6 +
 board/samsung/common/board.c             |  55 +++-
 board/samsung/common/misc.c              |  57 +++-
 board/samsung/odroid/Kconfig             |  15 +
 board/samsung/odroid/MAINTAINERS         |   6 +
 board/samsung/odroid/Makefile            |   8 +
 board/samsung/odroid/odroid.c            | 470 +++++++++++++++++++++++++++++++
 board/samsung/odroid/setup.h             | 255 +++++++++++++++++
 configs/odroid_defconfig                 |   3 +
 doc/README.odroid                        | 143 ++++++++++
 include/common.h                         |   1 +
 include/configs/odroid.h                 | 216 ++++++++++++++
 include/samsung/misc.h                   |  10 +
 21 files changed, 1337 insertions(+), 41 deletions(-)
 create mode 100644 arch/arm/dts/exynos4412-odroid.dts
Quoted 9 lines
 create mode 100644 board/samsung/odroid/Kconfig
 create mode 100644 board/samsung/odroid/MAINTAINERS
 create mode 100644 board/samsung/odroid/Makefile
 create mode 100644 board/samsung/odroid/odroid.c
 create mode 100644 board/samsung/odroid/setup.h
 create mode 100644 configs/odroid_defconfig
 create mode 100644 doc/README.odroid
 create mode 100644 include/configs/odroid.h

applied to u-boot-samsung

Thanks,
Minkyu Kang.