Skip to content

sama5d3xek: get GMAC working

Bo Shen u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchBo Shen
SeriesT-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] sama5d3xek: get GMAC working

Hi Andreas,

Quoted 7 lines · Andreas Bie?mann

I had a strange behaviour for my sama5d34ek board which could sometimes not get up GMAC in U-Boot. It turned out, that we missed to initialize the PHY correctly.

Bo, could you please verify correct behaviour on 100MiB devices like sama5d31ek?

Test OK on sama5d31ek board, you can add Tested-by tag for this patch series.

Thanks.

Quoted 9 lines

Andreas Bie?mann (2):
macb: simplify gmac initialisation
sama5d3xek: run PHY's config

  board/atmel/sama5d3xek/sama5d3xek.c |   29 ++++++++++++++++++++---------
  drivers/net/macb.c                  |   25 ++++++++-----------------
  2 files changed, 28 insertions(+), 26 deletions(-)

Best Regards,
Bo Shen