ARM: OMAP2+: PRCM cleanups for 3.18 merge window
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 26 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 26 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Nishanth Menon |
|---|---|
| Series | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window
Quoted 29 lines · Tony Lindgren
Quoted 17 lines · Tony Lindgren
Quoted 16 lines · Tero Kristo
Hi,
This set contains PRCM related cleanups meant for 3.18 merge window. These are based on top of 3.17-rc1 + the PRM set from Nishanth Menon
(http://article.gmane.org/gmane.linux.ports.arm.kernel/350305.) Nishanth's set is used as basis to avoid merge issues.Purpose of this work is to eventually convert the PRCM code into a separate driver, but this is done in incremental parts as the amount of changes is substantial. Expected conclusion of this work is 3.19 if everything goes fine.
This part of the work mostly moves some of the SoC specific PRCM driver calls under generic version of the same, and adds SoC-ops to support these on the driver level.
Quoted 6 lines
Quoted 4 lines
Working branch posted here:
tree: https://github.com/t-kristo/linux-pm.git
branch: for-v3.18/prcm-cleanupPaul, any comments on this series?
Just gave this branch a quick try, it seems to work with off-idle for me when merged with current linux-omap master branch. The following merge resolution is needed because of the recent pre es3.1 fix though.
Quoted 6 lines
I've pushed out this merged with all the other pending patches into omap-for-v3.18/tmp-merge-2014-09-18.
Nishant, care to give it a try and check your recent PM related changes work with it?
Sure. Sorry about the delay.. needed to find some workarounds for working with my board farm..
Based on:
omap-for-v3.18/tmp-merge-2014-09-18
0164b2d Merge branch 'omap-for-v3.18/prcm' into omap-for-v3.18/tmp-merge
Test #1: basic testing
Added
69c6133 HACK: Makefile: Build a uImage with dtb already appended (for legacy boards)
commit 0164b2dbe83e885a53b0c9a99a508bdbfdf7ee6d BASIC boot
1: am335x-evm: Boot PASS: http://slexy.org/raw/s2zy9OUOMM 2: am335x-sk: Boot PASS: http://slexy.org/raw/s2t0JaiHYf 3: am3517-evm: Boot PASS: http://slexy.org/raw/s2SRkMMQwp 4: am37x-evm: Boot PASS: http://slexy.org/raw/s20T0sq5dp 5: am43xx-epos: Boot PASS: http://slexy.org/raw/s2AVYqDVBf 6: am43xx-gpevm: Boot PASS: http://slexy.org/raw/s213N14B9r 7: BeagleBoard-XM: Boot PASS: http://slexy.org/raw/s21yyMkFRS 8: beagleboard-vanilla: Boot PASS: http://slexy.org/raw/s2SYJOHRwI 9: beaglebone-black: Boot PASS: http://slexy.org/raw/s214QDgb06 10: beaglebone: Boot PASS: http://slexy.org/raw/s21SOLcjMD 11: craneboard: Boot PASS: http://slexy.org/raw/s218cXoYSl 12: dra72x-evm: Boot FAIL: http://slexy.org/raw/s21BAnAW8N 13: dra7xx-evm: Boot PASS: http://slexy.org/raw/s21kf4G5Sh
14: OMAP3430-Labrador(LDP): Boot PASS: http://slexy.org/raw/s21QIGwFOM
15: n900: Boot PASS: http://slexy.org/raw/s21T5xECo2
16: omap5-evm: Boot PASS: http://slexy.org/raw/s20qxa3iPw
17: pandaboard-es: Boot PASS: http://slexy.org/raw/s2Fh0hMW7n
18: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s2vqUc528i
19: sdp2430: Boot PASS: http://slexy.org/raw/s21gAsEAeD 20: sdp3430: Boot PASS: http://slexy.org/raw/s2dvThSn5D
TOTAL = 20 boards, Booted Boards = 19, No Boot boards = 1
Test #2: PM test (cpufreq/cpuidle/suspend-resume where applicable)
Testing script: (http://slexy.org/view/s21SRQehwu)
Added the following patches:
59bf40d ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support (discussion still going on https://patchwork.kernel.org/patch/4764661/
- but good to know if it still continues to work with PRM changes).
69c6133 HACK: Makefile: Build a uImage with dtb already appended (for legacy boards)
b854ca8 gpio: omap: Fix interrupt names
(https://patchwork.kernel.org/patch/4854511/)
c50fc8b pinctrl: single: AM437x: Add pinctrl compatibility 37d17bf pinctrl: single: Add DRA7 pinctrl compatibility 74121c6 pinctrl: bindings: Add OMAP pinctrl binding (all of the above are in linux-next)
efb2486 clk: prevent erronous parsing of children during rate change b92ac70 clk: ti: dra7-atl: Provide error check for incoming parameters in set_rate
96e8b6b clk: ti: divider: Provide error check for incoming parameters in set_rate
(all above picked up by mike)
92e5e74 ARM: OMAP2+ / pm_debug: add support for wakeup_timer configuration (wakeup timer for testing purposes - remote boards)
with these:
commit 0164b2dbe83e885a53b0c9a99a508bdbfdf7ee6d + Additional patches basic PM test
1: am335x-evm: Boot PASS: http://slexy.org/raw/s2xRMuVHvj 2: am335x-sk: Boot PASS: http://slexy.org/raw/s2qEHyI9Rs 3: am3517-evm: Boot PASS: http://slexy.org/raw/s2Vptpboop 4: am37x-evm: Boot PASS: http://slexy.org/raw/s21TKVsyet 5: am43xx-epos: Boot PASS: http://slexy.org/raw/s20KGye4N9 6: am43xx-gpevm: Boot PASS: http://slexy.org/raw/s201uuCOp2 7: BeagleBoard-XM: Boot PASS: http://slexy.org/raw/s21ChQP74I 8: beagleboard-vanilla: Boot PASS: http://slexy.org/raw/s20oagBAsl 9: beaglebone-black: Boot PASS: http://slexy.org/raw/s2VT200vL0 10: beaglebone: Boot PASS: http://slexy.org/raw/s20raoHSya 11: craneboard: Boot PASS: http://slexy.org/raw/s2vq6MYXNZ 12: dra72x-evm: Boot FAIL: http://slexy.org/raw/s2EPseu0Jj 13: dra7xx-evm: Boot PASS: http://slexy.org/raw/s21JJGLkTU
14: OMAP3430-Labrador(LDP): Boot PASS: http://slexy.org/raw/s20Drlvdlp
15: n900: Boot PASS: http://slexy.org/raw/s21aDnJ1Bi
16: omap5-evm: Boot PASS: http://slexy.org/raw/s20ClvPKeK
17: pandaboard-es: Boot PASS: http://slexy.org/raw/s2L0dt0syP
18: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s2OlA9hfzy
19: sdp2430: Boot PASS: http://slexy.org/raw/s20Kgf04TW 20: sdp3430: Boot PASS: http://slexy.org/raw/s21p71QaVO
TOTAL = 20 boards, Booted Boards = 19, No Boot boards = 1
Signature · 2 lines
Regards, Nishanth Menon