Driver for talking to PLX PEX8xxx PCIe switch over I2C

Most of the PLX PCI Express switches (and also switches from other vendors such IDT) provide an I2C based secondary interface to access and program the switch. This can be used to program the switch in situations where the PCIe interface may not be suitable, or even available. (For instance, we may need to program the device in a particular fashion before we even begin enumerating on the PCI, or to even enable the PCIe interface of the device). More information on usecases and other details has been provided in the documentation being added as part of this patchset.

This is a driver that allows talking to the PLX PEX8xxx family of PCIe switches over its I2C interface. Here are the patch descriptions:

[Patch 1/4] - Adds the PEX8xxx driver that exports API calls to read / write. [Patch 2/4] - Adds a sysfs interface, to allow access to the switch. [Patch 3/4] - Adds the MAINTAINERS entry.
[Patch 4/4] - Adds the documentation in Documentation/PCI/pex8xxx_i2c.txt

Since this is a driver for a PCIe switch, I currently put it under /driver/pci/. I'm very open to suggestions for moving this around (Does introducing drivers/pci/switch/ seem any better?). Especially I can see that the drivers/pci/Kconfig appears under "Bus Options" in the main menu which does not look like the right place for this driver. I am looking for suggestions here.

Looking forward to comments,

Thanks,

Rajat

Rajat Jain (4):
pci: Add I2C driver for the PLX PEX8xxx PCIe switch pci/pex8xxx: Add sysfs interface for userspace access.
MAINTAINERS: Add new device driver entry for PEX pex8xxx
Documentation: Add documentation for the PCI switch PEX8xxx I2C
driver

 Documentation/PCI/pex8xxx_i2c.txt |  134 +++++++++
 MAINTAINERS                       |    7 +
 drivers/pci/Kconfig               |   13 +
 drivers/pci/Makefile              |    2 +
 drivers/pci/pex8xxx_i2c.c         |  538 +++++++++++++++++++++++++++++++++++++
 include/linux/i2c/pex8xxx_i2c.h   |   36 +++
 6 files changed, 730 insertions(+)
 create mode 100644 Documentation/PCI/pex8xxx_i2c.txt
 create mode 100644 drivers/pci/pex8xxx_i2c.c
 create mode 100644 include/linux/i2c/pex8xxx_i2c.h

1.7.9.5