Skip to content

omap3: overo: Add foreign expansion board support

Stefan Herbrechtsmeier u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/5] omap3: overo: Add foreign expansion board support

Am 16.09.2014 um 17:51 schrieb Stefan Herbrechtsmeier:

Quoted 25 lines

At the moment the boot loader use a common configuration for all Gumstix Overo expansion boards. This also includes configuration of all inputs and outputs even if they aren't used by the boot loader. Because the Overo module could be used on foreign expansion boards with different configurations this could lead to problems. Split the configuration into a Overo module and expansion board part. The expansion board configuration is skipped if a foreign expansion board is detected. This enables a foreign expansion board to use the common boot loader without any modifications. It could load a specific device tree by saving the expansion name in the EEPROM.

Additionally fix some errors in the environment configuration and add USB host support.

The series is only tested on a foreign expansion boards. It would be nice if somebody could test it on an expansion board with network support.

Stefan Herbrechtsmeier (5):
omap3: overo: Fix fdtfile test
omap3: overo: Call bootm only after successful nand read
omap3: overo: Move ethernet setup to board_eth_init function
omap3: overo: Separate module and expansion board MUX configuration
omap3: overo: Add usb host support

Quoted 5 lines
  board/overo/overo.c           | 137 ++++++++++++++++++++++++++++----------
  board/overo/overo.h           | 150 ++++++++++++++++++++++--------------------
  include/configs/omap3_overo.h |  15 ++++-
  3 files changed, 195 insertions(+), 107 deletions(-)

Any comments would be appreciated.