Skip to content

iMX6 SabreSD SPL Support

Nikolay Dimitrov u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v6 Latest0 of 5 patches 0 repliesNew

Patches in v6 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support

Hi Fabio,

Quoted 13 lines · Fabio Estevam
Quoted 12 lines · Nikolay Dimitrov

Hi John,

Quoted 7 lines · John Tobias

This patch is for SPL support for iMX6 SabreSD. The said patches has been tested to work on SD2 and SD3 port of the said board.

After applying the following patches, it will produces SPL and u-boot.img binary images.

Quoted 8 lines
Quoted 1 line

Is it still possible to build a regular, non-SPL image for the SabreSD?

Yes, it still works and I have tested it too.

make mx6qsabresd_config
make

will generate the non-SPL u-boot.imx binary.

Thanks. This is great, as the non-SPL version is much easier to upload via OTG. At least I don't know a way to boot the SPL+complete loader through OTG.

Regards,
Nikolay

Read the cover letter in its thread