Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 9 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 9 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH v1 0/9] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)
Hi Prafulla,
Quoted 10 lines · Stefan Roese
This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (
bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the also included SERDES / PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here.
Quoted 2 lines
Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm with MV78460).
Prafulla, how should we continue with this patch-set? Do you have any comments on it? If you are okay with it, do you plan to pull it via your repository? Or should I pull it via some branch in one of my repositories?
Thanks,
Stefan