Skip to content

introduce sata stop

Stefano Babic u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/5] introduce sata stop
Quoted 16 lines · Nikita Kiryanov

This series adds the sata stop command, which includes both cmd_sata code and driver support for resetting sata.
A non-dummy reset_sata() is provided for dwc_ahsata, and a non-default sata_stop() is provided for cm_fx6.
Finally, we use the new functionality to turn off sata on boot for mx6 devices.

Cc Stefano Babic <[email protected]>
Cc Simon Glass <[email protected]>

Nikita Kiryanov (5):
arm: mx6: introduce disable_sata_clock
sata: implement reset_sata for dwc_ahsata
cmd_sata: implement sata stop command
arm: mx6: cm_fx6: implement board specific sata stop
arm: imx: stop sata on boot

Quoted 16 lines
 arch/arm/cpu/armv7/mx6/clock.c        |  8 ++++++++
 arch/arm/cpu/armv7/omap-common/sata.c |  5 +++++
 arch/arm/imx-common/cpu.c             |  8 ++++++--
 arch/arm/include/asm/arch-mx6/clock.h |  1 +
 board/compulab/cm_fx6/cm_fx6.c        | 12 +++++++++---
 common/cmd_sata.c                     | 24 +++++++++++++++++++++++-
 drivers/block/ata_piix.c              |  5 +++++
 drivers/block/dwc_ahsata.c            | 21 +++++++++++++++++++++
 drivers/block/fsl_sata.c              |  5 +++++
 drivers/block/pata_bfin.c             |  5 +++++
 drivers/block/sata_dwc.c              |  5 +++++
 drivers/block/sata_sil.c              |  5 +++++
 drivers/block/sata_sil3114.c          |  5 +++++
 include/sata.h                        |  3 +++
 14 files changed, 106 insertions(+), 6 deletions(-)

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Read the cover letter in its thread