RFC power: mxs_power: add driver for mxs power subsystem
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH RFC 0/3] power: mxs_power: add driver for mxs power subsystem
Quoted 24 lines
This patch series adds support for Freescale i.MX23, i.xM28 power subsystem.
The idea for this driver was born in the discussion with Mark Rutland about the mxs-regulator driver [1].
The main use is to trigger driver probing of the underlying DT child nodes like on-chip regulators. But it's also the first step for cpufreq-dt support.
[1] - https://lkml.org/lkml/2014/9/29/283
Stefan Wahren (3):
DT: add binding for mxs power subsystem
power:mxs_power: add driver for mxs power subsystem
ARM: dts: enable power subsystem for i.MX28.../devicetree/bindings/power/mxs_power.txt | 23 ++ arch/arm/boot/dts/imx28.dtsi | 6 +- drivers/power/Kconfig | 8 + drivers/power/Makefile | 1 + drivers/power/mxs_power.c | 226 ++++++++++++++++++++ 5 files changed, 263 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/power/mxs_power.txt create mode 100644 drivers/power/mxs_power.c
Quoted 3 lines
--
1.7.9.5
Are there any other questions or suggestions about these patch series?
Stefan