Skip to content

Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)

Stefan Roese u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 11 patches 0 repliesNew
  2. v2 posting 1/211 patches 0 repliesSuperseded
  3. v10 of 9 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 11 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/11] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)
Quoted 13 lines · Luka Perkov
Quoted 11 lines · Stefan Roese

This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the also included SERDES / PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here.

Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm with MV78460).

Quoted 7 lines

I've tested entire series on Kirkwood board RaidSonic ICY BOX IB-NAS62x0. That said:

Tom, can you pull this series as-is or should I pull it in Marvell tree first?

Tom, any updates on this? I really would like to see this patch series applied for the next release. Its been on the list for quite some while with zero negative feedback so far.

Thanks,
Stefan