Skip to content

ASoC: dwc: Add device tree support to designware I2S

Andrew Jackson alsa-devel linux-arm-kernel linux-devicetree lkml 5 versions – Applied

Status from this message: Applied, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest6 patches 5 repliesApplied
  2. v45 patches 2 repliesSuperseded
  3. v35 patches 11 repliesApplied
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v26 patches8 repliesSuperseded
v15 patches30 repliesSuperseded

Changes in v5 from the cover letter

+ Remove all clk_put calls [Andrew Jackson]
+ Call clk_disable_unprepare [Andrew Jackson]

Patches in v5 Applied

#Subject and filesSizeRepliesApplied
1/6ASoC: dwc: Switch to managed clock resourcesound/soc/dwc/designware_i2s.c+2 -81 reply
2/6ASoC: dwc: Prepare clock before usesound/soc/dwc/designware_i2s.c+5 -22 replies
3/6ASoC: dwc: Read I2S block configuration from registerssound/soc/dwc/designware_i2s.c+86 -100 replies
4/6ASoC: dwc: Register components with managed interfacesound/soc/dwc/designware_i2s.c+1 -20 replies
5/6ASoC: dwc: Add documentation for I2S DTDocumentation/devicetree/bindings/sound/designware-i2s.txt+31 -01 reply
6/6ASoC: dwc: Add devicetree support for Designware I2Ssound/soc/dwc/Kconfig sound/soc/dwc/designware_i2s.c+151 -431 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH v5 0/6] ASoC: dwc: Add device tree support to designware I2S

From: Andrew Jackson <[email protected]>

This patch set extends the DesignWare I2S driver to provide device tree support and fixes a couple of small faults.

Changes v4->v5
+ Remove all clk_put calls [Andrew Jackson]
+ Call clk_disable_unprepare [Andrew Jackson]

Changes v3->v4
+ Drop applied patches
+ Use combined function to prepare clock [Mark Brown]
+ Use managed clock resources to avoid clk_put [Mark Brown]
+ Read configuration prameters from hardware for both platform data and device tree [Mark Brown]
+ Re-order patch sequence [Mark Brown]
+ Change union name to avoid future collisions [Mark Brown]
+ Check return code from clk_set_rate [Mark Brown]
+ Check parametsrs read from hardware agaist array limits and add further comments [Mark Brown]
+ Add of_match_ptr [Mark Brown]

Changes v2->v3
+ Drop applied patch
+ Flush FIFOs in prepare rather than hw_params [Lars-Peter Clausen]

Changes v1->v2
+ Drop negative use count patch [Mark Brown]
+ Remove unnecessary debug print messages [Lars-Peter Clausen]
+ Rewrite iteration as for loop rather than do...while [Mark Brown]
+ Reorder patches to send fixes first [Mark Brown]
+ Simplify device tree code [Mark Brown]
+ Split device tree patch in two [Mark Brown]
+ Expand explanatory comment on channel configuration [Rajeev Kumar]

Arnd: I've not forgotten about updating the spear entries and
will submit as a separate patch.

Andrew Jackson (6):
ASoC: dwc: Switch to managed clock resource
ASoC: dwc: Prepare clock before use
ASoC: dwc: Read I2S block configuration from registers
ASoC: dwc: Register components with managed interface
ASoC: dwc: Add documentation for I2S DT
ASoC: dwc: Add devicetree support for Designware I2S

 .../devicetree/bindings/sound/designware-i2s.txt   |   31 +++
 sound/soc/dwc/Kconfig                              |    1 +
 sound/soc/dwc/designware_i2s.c                     |  283 ++++++++++++++++----
 3 files changed, 263 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html