mmc: dw_mmc: exynos: Add HS400 support
Get series with b4
b4 am [email protected]Versions newest first
- v4 Latest0 of 2 patches 0 repliesNew
Patches in v4 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.
Cover letter [PATCH v4 0/2] mmc: dw_mmc: exynos: Add HS400 support
Quoted 12 lines · Jaehoon Chung
Hi, Alim.
Quoted 6 lines · Alim Akhtar
This adds HS400 mode support for exynos
dw_mmchost controller.Currently tested on Exynos5800-peach-pi platform for HS400 mode. Tested HS200 mode with this series applied, HS200 still works.
Appreciate testing on other exynos5/7 platform which supports emmc5.0
I will test this patch on exynos5/7 board.
What's the result? :-) If it's OK, I'll take DT changes for exynos stuff, I'm not sure about the driver changes though...
Thanks,
Kukjin
Quoted 27 lines
Best Regards,
Jaehoon ChungQuoted 25 lines
Changes in V4:
* drop the idea of changing existing binding forciu_divas per [1]
* addressed comments from Jaehoon Chung [2][1] http://www.spinics.net/lists/linux-samsung-soc/msg40923.html
[2] http://www.spinics.net/lists/devicetree/msg64373.htmlChanges in V3:
rebased on ulf's next (commit: 607b448 mmc: core: Make tuning block patterns static)Seungwon Jeon (2):
mmc:dw_mmc: exynos: Support eMMC's HS400 mode
ARM: dts: Add HS400 support for exynos5420 and exynos5800.../devicetree/bindings/mmc/exynos-dw-mshc.txt | 7 + arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +- arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 + arch/arm/boot/dts/exynos5420-smdk5420.dts | 4 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +- drivers/mmc/host/dw_mmc-exynos.c | 187 ++++++++++++++++---- drivers/mmc/host/dw_mmc-exynos.h | 19 +- drivers/mmc/host/dw_mmc.c | 16 +- drivers/mmc/host/dw_mmc.h | 2 + 9 files changed, 212 insertions(+), 38 deletions(-)