Skip to content

pmic:pfuze support buck regulator mode switch

Przemyslaw Marczak u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v4 Latest0 of 3 patches 0 repliesNew

Patches in v4 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [U-Boot] [PATCH v4 0/3] pmic:pfuze support buck regulator mode switch

Hello Peng,

Quoted 5 lines · Peng Fan

Hi, Przemyslaw

There is a few return value comments that from Fabio, I correct them and send out v4 version. Others are same to the v1 version patch set. If this patch set is fine, please give you Acked-by. Sorry for the troubles.

No troubles, just normal review process:)

Quoted 20 lines

This patch set is to support buck regulator can
working in different switching modes. To improve
system efficiency the buck regulators can operate
in different switching modes.

patch 1/3 is to add related bit definitions and registers. patch 2/3 is to implement the switching mode init function. patch 3/3 is to add related mode init function in board code.

mx6slevk board is not included in this patch set, since power and i2c interface are not implemented for it. Future patch will cover this to add PAD setting, power_init_board and etc.

Peng Fan (3):
pmic:pfuz100 add switch mode and more registers pmic:pfuze implement pmic_mode_init imx:mx6 set normal APS and standby PFM mode

Quoted 8 lines
  board/freescale/common/pfuze.c                | 36 ++++++++++++++++++
  board/freescale/common/pfuze.h                |  1 +
  board/freescale/mx6qsabreauto/mx6qsabreauto.c |  6 +++
  board/freescale/mx6sabresd/mx6sabresd.c       |  6 ++-
  board/freescale/mx6sxsabresd/mx6sxsabresd.c   |  6 ++-
  include/power/pfuze100_pmic.h                 | 53 +++++++++++++++++++++++++++
  6 files changed, 106 insertions(+), 2 deletions(-)

For the series, Acked-by: Przemyslaw Marczak <[email protected]>

Best regards,

Signature · 4 lines
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com

Read the cover letter in its thread