Skip to content

ARM: DRA7: add display support

Nishanth Menon linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 of 9 patches 0 repliesNew

1 of 9 patches is in this archive. The cover letter announces 9.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
9/9RFC: ARM: DRA7: enable DSS_DESHDCP_CLKEN+0 -06 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] ARM: DRA7: add display support
Quoted 6 lines · Tomi Valkeinen

Hi,

This series adds the arch/arm/ side of the display support for DRA7 (DRA72x, DRA74x, AM54xx) SoCs. Also support for HDMI output on x15 and DRA72 EVM boards is added.

Quoted 7 lines

The series is based on OMAPDSS driver patches in fbdev changes for 3.20, which have been merged to Linus' tree.

The changes are very similar to OMAP5 DSS. All the other patches look fine to me except the "RFC: ARM: DRA7: enable DSS_DESHDCP_CLKEN". That's been discussed earlier with Paul and Tero, but I don't think we have any good solution for it yet.

Is there some specific tag I can test this on (some next perhaps?), I get the following error:
build fail, Error:
arch/arm/mach-omap2/display.c: In function ?omap_display_get_version?:
arch/arm/mach-omap2/display.c:285:10: error: ?OMAPDSS_VER_DRA7xx? undeclared (first use in this function) arch/arm/mach-omap2/display.c:285:10: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-omap2/display.c:288:1: warning: control reaches end of non-void function [-Wreturn-type]
make[1]: *** [arch/arm/mach-omap2/display.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2
make: *** Waiting for unfinished jobs....

Further are you proposing this for 3.20 or 3.21 window? 3.20, we seem to have already missed.

Quoted 5 lines

Tomi

Tomi Valkeinen (9):
arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk

^^

Quoted 5 lines

ARM: DRA7: hwmod: add DMM hwmod description
ARM: DRA7: hwmod: set DSS submodule parent hwmods
ARM: OMAP: display: change compat names to array
ARM: OMAP2+: display: detect DRA7 DSS arm/dts: dra7.dtsi: add DSS support

^^

Quoted 1 line

arm/dts: dra72-evm.dts: add HDMI

^^

Quoted 1 line

arm/dts: am57xx-beagle-x15.dts: add HDMI

ARM: dts: am57xx-beagle-x15: Add HDMI

Would be good to follow above convention for all dts patches $subject.

Quoted 13 lines

RFC: ARM: DRA7: enable DSS_DESHDCP_CLKEN

 arch/arm/boot/dts/am57xx-beagle-x15.dts   |  80 +++++++++++++++++++++
 arch/arm/boot/dts/dra7.dtsi               |  38 ++++++++++
 arch/arm/boot/dts/dra72-evm.dts           | 111 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/dra72x.dtsi             |  11 +++
 arch/arm/boot/dts/dra74x.dtsi             |  15 ++++
 arch/arm/boot/dts/dra7xx-clocks.dtsi      |   1 +
 arch/arm/mach-omap2/display.c             |  32 +++++----
 arch/arm/mach-omap2/io.c                  |  11 +++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  32 +++++++++
 9 files changed, 316 insertions(+), 15 deletions(-)
Signature · 2 lines
Regards,
Nishanth Menon