sunxi: Yones Toptech BD1078 support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/3] sunxi: Yones Toptech BD1078 support
Hi,
p.s.
Quoted 7 lines · Paul Kocialkowski
This series goes on top of my previous series that concludes with Ainol AW1 support.
Also, if you're interested by the idea of using
sunxi_name_to_gpio_bank, this could be extended for UART as well, where *many* different pin mux setups are possible. We are just lucky that hardware designers usually use the ports that U-Boot selects, but there is no fundamental reason for that.
I'm not really interested in making the #ifdeffery for the uart setup even more complicated, eventually we should get all this info, including all the pinmux stuff from a dtb (shared with the kernel) appended to the u-boot binary, and then this will use standard devicetree pinmux stuff, until we get there I would like to keep this as simple as possible.
Regards,
Hans