OMAP2+: voltage: first pass at cleanup/reorganization
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization
Hi Paul,
Quoted 2 lines
-----Original Message-----
From: linux-arm-kernel-bounces at lists.infradead.org
[mailto:linux-arm-kernel-bounces at lists.infradead.org] On Behalf
Quoted 5 lines
Of Paul Walmsley
Sent: Monday, February 21, 2011 7:39 AM
To: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org
Cc: khilman at ti.com; nm at ti.com; b-cousson at ti.com; mturquette at ti.com
Subject: [PATCH 0/3] OMAP2+: voltage: first pass at
cleanup/reorganization
Quoted 4 lines
Hello,
this patch set does an initial round of cleanup on the OMAP "voltage"
code
Quoted 1 line
in
arch/arm/mach-omap2/voltage.c. As part of this process, the header
files
Quoted 1 line
for the voltage code and SmartReflex are moved into
arch/arm/mach-omap2,
since
Quoted 3 lines
they are currently OMAP2+-specific.
There is still quite a bit of cleanup left to do; hopefully someone else
will
Quoted 3 lines
get to it before I do. More details are in the last patch.
This series was built-tested for an OSK5912-specific config,
omap1_defconfig,
Quoted 1 line
a N800-specific config,
omap2plus_defconfig, an OMAP3-specific config,
and
Quoted 1 line
an OMAP4-specific config. It was boot-tested on an OMAP35xx
Beagleboard.
Quoted 1 line
Further testing assistance is, of course, appreciated.
I found these abort on my 4430SDP. The below changes I found are needed for it to bootup..
I tested the 'integration-2.6.39' branch ofgit://git.pwsan.com/linux-integration and the patch is based on this branch.
---