Skip to content

USB OTG PHY driver for NXP LPC18xx family

Kishon Vijay Abraham I linux-arm-kernel linux-devicetree 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest0 of 2 patches 0 repliesNew
  2. v30 of 2 patches 0 repliesSuperseded

Patches in v4 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/2] USB OTG PHY driver for NXP LPC18xx family
Quoted 7 lines · Joachim Eastwood

This patch set adds support for the internal USB OTG PHY found on NXP LPC18xx and LPC43xx devices. Driver takes care of enabling the PHY and setting the clock rate which is need for USB0 support on this platform.

This version address moves the dt node under the creg syscon and rebases the patch set on 4.2-rc1.

merged this to linux-phy tree.

Cheers
Kishon

Quoted 25 lines

Changes in v4:
- rebase on 4.2-rc1
- move dt node under creg where the control reg is

Changes in v3:
- depend on MFD_SYSCON

Changes in v2:
- use PTR_ERR_OR_ZERO in phy driver
- rename binding doc
- update doc commit message

Joachim Eastwood (2):
phy: add lpc18xx usb otg phy driver
phy: dt bindings: add NXP LPC18xx/43xx USB OTG PHY bindings

 .../bindings/phy/phy-lpc18xx-usb-otg.txt           |  26 ++++
 drivers/phy/Kconfig                                |  11 ++
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-lpc18xx-usb-otg.c                  | 143 +++++++++++++++++++++
 4 files changed, 181 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
 create mode 100644 drivers/phy/phy-lpc18xx-usb-otg.c

Read the cover letter in its thread